10/100/1000Base-T to 1000Base-SX/LX Media Converter
ET-913+ V2 series
  • Compliant with IEEE 802.3 10BaseT, IEEE802.3u 100BaseTX , IEEE 802.3ab 1000BaseT and IEEE 802.3z 1000BaseSX/LX Standards
  • One 10/100/1000BaseT Gigabit Ethernet TP Port and One 1000BaseSX/LX Gigabit Ethernet Fiber Port
  • One 1000BaseSX/LX Fiber Port can support either Multi or Single Mode
  • TP Port can support Half/Full-Duplex, Auto-MDI/MDI-X and Auto-Negotiation
  • Multiple Fiber Connectors
  • Supports jumbo frame 9.6KB
  • Providing 19” Converter Chassis for up to 16 slots with redundant power supply for optional expansion use
  • Supports DIP switch and LFP function



Best media conversion solutions for network connectivity
Edimax’s full series of Media Converter are designed to meet the needs for massive optical fiber network, provide the whole Gigabit Ethernet network implementation.

Migrating between copper and fiber-based Medium
ET-913+ series convert the signals between two different transmission medium, allowing user a simple and cost-effective method to migrate between UTP cable and fiber optic cable. It can transmit signals up to 550m (multimode) and 10/20/30/60km (single-mode) in fiber medium, allowing users to extend network.

Comply with IEEE Standards
ET-913+ series are fully compliant with IEEE 802.3/u/ab 10/100/1000Base-T and 802.3z 1000Base-SX/LX standards. The device comes with one RJ-45 port to connect to a 10/100/1000Base-T device such as workstation or switch and one fiber connection to connect a 1000Base-SX/LX device.

Feature LED and Fiber link alarm
User could monitor the device through Feature LED. In addition, Fiber Link Alarm could allow user to monitor and maintain their critical fiber link more effectively.

Unique voltage supervisor
Built in voltage supervisor IC will automatically reset all chipsets in converter as power voltage drop below 2.9V, this action can make sure fiber port and TP port work normally when thunder storm or power unstable occurring cause the power electricity suddenly down in an instant time.

Plug-and-Play Installation
Simply to plug the TP and fiber port to the device having the media convertibility.

 

Features

  • Compliant with IEEE 802.3 10BaseT, IEEE802.3u 100BaseTX , IEEE 802.3ab 1000BaseT and IEEE 802.3z 1000BaseSX/LX Standards
  • One 10/100/1000BaseT Gigabit Ethernet TP Port and One 1000BaseSX/LX Gigabit Ethernet Fiber Port
  • One 1000BaseSX/LX Fiber Port can support either Multi or Single Mode
  • TP Port can support Half/Full-Duplex, Auto-MDI/MDI-X and Auto-Negotiation
  • Multiple Fiber Connectors
  • Supports jumbo frame 9.6KB
  • Providing 19” Converter Chassis for up to 16 slots with redundant power supply for optional expansion use
  • Supports DIP switch and LFP function
DIP
ON
OFF
1
Converter & Switch Mode
Switch Mode
2
LFP Enable
LFP Disable

 

Order Information

Model

Optical Fiber Description

ET-913MSC+ V2
10/100/1000T to 1000SX Multi Mode 550M-SC
ET-913SSC1+ V2
10/100/1000T to 1000LX Single Mode 10KM-SC
ET-913SSC2+ V2
10/100/1000T to 1000LX Single Mode 20KM-SC
ET-913SSC3+ V2
10/100/1000T to 1000LX Single Mode 30KM-SC
ET-913SSC5+ V2
10/100/1000T to 1000LX Single Mode 50KM-SC
ET-913SSC6+ V2
10/100/1000T to 1000LX Single Mode 60KM-SC
ET-913SSC8+ V2
10/100/1000T to 1000LX Single Mode 80KM-SC
ET-913SW2A+ V2
WDM 10/100/1000 to 1000 Single Mode 20KM-A
ET-913SW2B+ V2
WDM 10/100/1000 to 1000 Single Mode 20KM-B
ET-913SW4A+ V2
WDM10/100/ 1000 to 1000 Single Mode 40KM-A
ET-913SW4B+ V2
WDM 10/100/1000 to 1000 Single Mode 40KM-B
ET-913SFP V2
10/100/1000T to 1000 SFP Media Converter


Standards IEEE802.3 10BaseT
IEEE802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX/LX
IEEE 802.3x Flow Control
Features Number of Ports:
1 10/100/1000BaseT with RJ-45 Connector
1 1000BaseSX/LX with Fiber Connector (Multi/Single Mode)
Jumbo Frames: 9.6 KB
Data Transfer Rate 2000Mbps/Full-Duplex
Transmission Media TP:
10BaseT Cat. 3, 4, 5 UTP/STP
100BaseTX Cat. 5 UTP/STP
1000BaseT Cat. 5, 5E, 6 UTP/STP, up to
1000BaseSX:
50/125μm Multi Mode Fiber optic cable, up to 62.5/125μm Multi Mode Fiber optic cable, up to
1000BaseLX:
9/125μm Single Mode Fiber optic cable
LED Indicators Per Port:
(TX): Link, TX
(FX): Link, RX
Per Unit: Power
Power Requirement DC5V/2A
Power Consumption 10 Watts (Max)
Dimensions 102 x 74 x (L x W x H)
Weight 240g
Operating Temperature 0 to 45℃
Storage Temperature -20 to 90℃
Humidity 10 to 90% RH (non-condensing)
Certifications FCC Class B, CE
*Maximální výkon, přenosové rychlosti a pokrytí záleží na síťových podmínkách a faktorech životnícho prostředí.
* Specifikace a design se mohou změnit bez předchozího upozornění.